Publicité
Ignite flame:
• With the cartridge cover
until you hear a click. The spark should now have ignited the flame. If this is not the
case, turn the knob
• If the flame still does not ignite after the 3rd attempt, open the cartridge cover
and remove the cartridge. Shake the cartridge to check if it is still full. If necessary,
replace the cartridge and start the process again.
Adjust heat:
• With the gas volume control knob
tity and thus the desired heat.
• If you turn the gas volume control knob
flame goes out. Always turn the control to this position if you do not want to con-
tinue using the appliance.
After use:
• Make sure that the flame is completely extinguished.
• Slide the cartridge lock
cover
and remove the gas cartridge.
9
• Close the cartridge cover
dry place.
Important:
NEVER store the gas cooker with the cartridge inserted and make sure that the
gas cooker has cooled down before storing it!
Troubleshooting:
If the gas cooker does not work properly or if unusual behaviour occurs, first check
that all safety and usage instructions have been followed. Then check the outlets
around the burner
not solve the problem yourself, please contact customer service.
Cleaning and care
• Remove the cartridge before cleaning the machine.
• Use a damp tea towel with a little detergent (e.g. washing-up liquid) to clean the
machine. Then dry it with a dry, clean tea towel.
• If the holes around burner
a toothpick.
• You can carefully clean the inside of the cartridge holder with a brush. Be careful
not to damage the valve
closed, turn the gas volume control knob
9
to „OFF" and repeat the procedure.
6
to the „UNLOCK" (open) position, open the cartridge
5
again and store the cartridge upright in a cool and
9
, the piezo igniter
1
are blocked, you can remove this dirt carefully with
1
.
8
, you can continuously regulate the gas quan-
6
all the way to the right to „OFF", the
6
and all seals for wear and dirt. If you can-
4
to the left
6
9
Publicité
