Publicité
When the light bar no longer flashes, synchronization is performed.
Press the HOME button to access the menus on your console.
Paddles configuration
The M1, M2, M3 and M4 paddles on the back of the controller are programmable so that they can have the same functions as the action buttons.
The M1 M2 M3 M4 paddles can remap a maximum of 14 buttons
By default, the M1 paddle has the function of button 1
The M2 paddle has by default the function of button 3
The M3 paddle has by default the function of button 4
The M4 paddle has by default the function of button 2
There are 2 modes of paddle configuration:
A Remapping mode: 1 or more buttons can be set on 1 paddle
B Macro mode: sequences of functions of several buttons can be configured on 1 paddle.
Mode A: Remapping
Example of operation on the M1 paddle
1) First press and hold the M1 paddle while holding it down, then press Share, the turbo LED stays on, the programming mode is in progress.
2) Hold down the buttons you want to map, for example L1 and R2
3) Press M1 again to confirm the setting, the turbo LED goes out, the setting is successfully completed. Now if you press the M1 paddle, it will have the
L1 and R2 functions you have chosen.
4) Each pallet can replace one or more of the following buttons:
,
,
,
, L1, L2, R1, R2, joystick must, left joystick, directional cross (up/down/
right/left buttons)
In some games, the buttons are already programmed to perform several functions.
5) Memorizing the settings: once you have set up a paddle, it keeps the function(s) set up.
6) The instructions for setting up the other paddle are identical to the above steps.
B mode: Macro
Example of operation on the M1 paddle
1) First press and hold down the M1 paddle without releasing it, then press Option, the turbo LED remains on, the programming mode is in progress.
2) Press any button you want to set in Macro mode, for example L1 and R2
3) Press M1 again to confirm the setting; the turbo LED goes out, the setting is successfully completed. Now if you press the M1 paddle, the actions of the
L1 and R3 buttons will follow each other in the order in which you pressed the relevant buttons (if you first pressed the L1 button and then the R2 button,
the actions of each of these buttons will follow in this order: L1 action and R2 action).
4) Each paddle can replace one or more of the following buttons:
,
,
,
, L1, L2, R1, R2, joystick must, left joystick, directional cross (up/
down/right/left buttons)
In some games, the buttons are already programmed to perform several actions.
5) Memorizing the settings: once you have set up a paddle, it keeps the action sequence(s) set up.
6) The instructions for setting up the other paddle are identical to the above steps.
SPECIFICATIONS
DC 5V --- 250mAh
CUSTOMER SUPPORT
For answers to common questions, troubleshooting steps, and our Customer Support team, e-mail us at: sav@pixminds.com.
TERMS OF WARRANTY
Warranty period is 2 years from date of purchase with proof of purchase submitted. Operating instructions must be followed. Specifically excludes
any damages associated with leakage of batteries. Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident,
destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other
than our own service facility or an authorized service center, use or installation of non- Steelplay® replacement parts in the product or the modification
of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods,
lightning, or acts of God, or any use violative of instructions furnished by Steelplay®. Obligations of Steelplay® shall be limited to repair or replacement
with the same or similar unit, at our option. To obtain repairs under this warranty, present the product and proof of purchase (e.g., bill or invoice) to
the authorized Steelplay® Technical Support Center transportation charges prepaid. Any requirements that conflict with any state or Federal laws,
rules and/or obligations shall not be enforceable in that particular territory and Steelplay® will adhere to those laws, rules, and/or obligations. When
returning the product for repair, please pack it very carefully, preferably using the original packaging materials. Please also include an explanatory
note. IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read and followed the instructions in this
manual. This warranty is in Lieu of all other expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the exclusion or limitation of special,
incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
DISPOSAL OF WASTE BATTERIES AND ELECTRICAL AND ELECTRONIC EQUIPMENT
This WEEE symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life
separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local
municipal household waste disposal service or your retailer where you purchased the product.
[European Union] These symbols indicate that the electrical and electronic equipment and batteries marked with these symbols must not be disposed
of as household waste at end of life. They should rather be given to collection points for the recycling of electrical and electronic equipment and
batteries for proper trea™ent, recovery and recycling in accordance with national legislation and Directive 2012/19/EU. By eliminating these products
appropriately, you are helping to conserve natural resources and prevent potential negative effects on the environment and human health which could
otherwise be caused by inappropriate waste handling of these products. For more detailed information about recycling this product, please contact your
local municipal office, your household waste disposal service or the shop where you bought it. According to the national legislation, penalties may be
Publicité
