Publicité
SOUND
Power on and off the sound with button 2)
- see pictures 8 and 9.
When the sound is switched on, the signal sounds as
described before.
Basically: Each time a button is pressed, a signal
sounds - regardless of whether the sound is on or off.
ACCURACY COARSE / FINE
Select the accuracy mode requested with button 5) -
picture 10 = accuracy coarse
picture 11 = accuracy fine
NOTE
In case the receiver loses the signal, the last position received is recorded in the display for
5 seconds; this makes it possible to see in which position the receiver must start again.
DISPLAY ILLUMINATION
Switch on and off the display illumination with button 3).
STANDBY FUNCTION
Keep button 3) pressed for 3 sec. to switch on and off the standby function. In this mode the receiver
will automatically power off after 30 min. without signal to save battery power.
Sound
Sound
on
off
8
10
EN
9
11
11
Publicité
