Home Decorators Collection NORLINGTON Serie Guide D'utilisation Et D'entretien page 9

Assembly (continued)
9
Installing the shelves
□
Insert twenty shelf pins (DD) into the interior of the
side panels and media shelf. Insert the pins parallel
to one another to ensure the shelves are level.
□
Carefully place four adjustable shelves (K) onto the
shelf pins (DD).
□
Carefully place the adjustable media shelf (J) on the
shelf pins (DD).
10
Attaching the cabinet doors
□
Locate left door and right door (O & P).
□
Line up hinge cups on the cabinet doors (O & P) with
the hinge plates in the left and right side panels of
the media console. Slide the hinge plates over the
hinge cups as shown and tighten them with the
screws provided on the hinge plates.
□
Adjust the vertical height by loosening the four "A"
screws, in the diagram, on both hinges. Two of
them are usually in slotted holds which allows you
to adjust up or down by a few mm. Then tighten the
screws again.
□
Adjust the depth by loosing "B" screw, in the
diagram, and adjust the door. If the door cannot be
adjusted, please loosen screw "C", as shown in the
diagram, then try again. Tighten screw "B" and "C"
as shown in the diagram.
□
Adjust the cabinet doors sideways by turning the
screw "C" on both hinges on each door.
K
K
O
B.
9
Please contact 1-800-986-3460 for further assistance
DD
K
J
K
P
A.
C.
HOMEDEPOT.COM/HOMEDECORATORS