Publicité
Before carrying out any operations with the unit,
carefully read this instruction manual and keep it with cure
for future reference. It contains important about the installation,
SAFETY
G
i
eneral
nstruction
•
The products referred to in this manual conform to the European Community
Directives and are there-fore marked with CE:.
•
The unit is supplied with hazardous network voltage (110/230V~). Leave ser-
vicing to skilled personnel only. Never make any modifications on the unit not
described in this instruction manual, otherwise you will risk an electric shock.
•
Connection must be made to a power supply system fitted with efficient earth-
ing (Class I appliance ac-cording to standard EN 60598-1 ). It is, moreover,
recommended to protect the supply lines of the units from indirect contact
and/or shorting to earth by using appropriately sized residual current devices.
•
The connection to the main network of electric distribution must be carried out
by a qualified electrical installer. Check that the main frequency and voltage
correspond to those for which the unit is designed as given on the electrical
data label.
•
Never use the fixture under the following conditions:
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 45° C.
•
Make certain that no inflammable liquids, water or metal objects enter the
fixture.
•
Do not dismantle or modify the fixture.
•
All work must always be carried out by qualified technical personnel. Contact
the nearest sales point for an inspection or contact the manufacturer directly.
•
If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
W
arninGs and installation precautions
•
Never let the power cord come into contact with other cables! Handle the power
cord and all connections with the mains with particular caution!
•
Never modify, bend, mechanically strain, put pressure on, pull or heat up the pow-
er cord.
•
Never strain the cable. There must always be sufficient cable going to the device.
Otherwise, the cable will be damaged, which can cause serious damage.
•
Never remove warning or informative labels from the unit.
•
Never use anything to cover the ground contact.
•
Never lift the device holding it by the projector-head, as the mechanics may be
damaged
•
Do not shake the device. Avoid brute force when installing or operating the device.
•
Only operate the device after having checked if the housing is firmly closed and all
screws are tightly fastened.
•
Only operate the device after having familiarized with its functions.
•
Avoid flames and do not put close to flammable liquids or gases.
•
Always allow a free air space of at least 0.8 m around the unit for ventilation.
•
Always disconnect power from the mains, when device is not used or before clean-
ing! Only handle the power cord holding it by the plug. Never pull out the plug by
tugging the power cord.
Page 16
WARNING!
usage and maintenance of the unit.
Publicité
