Publicité
Smart Trim Hair Trimmer
USE
L
When an attachment is used
on different body parts (e.g.
the face, genital area), thor-
oughly clean the attachment
between the treatments.
•
Attaching and detaching attach
ments – Select the attachment
you want (1, 2, 3, 4, 5) and plug
it onto the main unit (10). The
attachment must engage audibly.
To detach the attachment, simply
pull it up and off.
•
Switching on / off – Press the
On / Off switch (7) to switch on
the device. When it is switched
on, the LED light (8) switches
on automatically. This gives you
a better view when trimming.
Press the On / Off switch again
to switch off the device. The LED
light goes out.
•
Extending – Pull carefully on the
bottom end of the main unit. The
handle (6) is extended so that ar-
eas of the body such as the neck
and shoulders are easier to reach
(Picture B).
•
Use – When trimming guide the
attachment (2, 3, 4, 5) through
the hair in the direction of hair
growth, similar to combing your
hair.
When shaving hold the attach-
ment (1) at a 45° angle to the skin
and guide it slowly over the hair
counter to the direction of hair
growth.
CLEANING AND
STORAGE
Please Note!
■
Never use any caustic or abrasive
cleaning agents. These may dam-
age the surface.
•
Use the cleaning brush to remove
hair and flakes of skin from the
blade (9) and the attachments (1,
2, 3, 4, 5).
•
Wipe down the device with a
damp cloth if necessary. The
attachments can also be cleaned
under running water.
•
Everything must be completely
dry before it is reassembled.
•
Store the device in a clean, dry
place so that it is out of the reach
of children and animals.
DISPOSAL
Dispose of the packaging
material in an environmentally
friendly manner so that it can
be recycled.
This device is governed
by the European Directive
2012/19/EU on waste electri-
cal and electronic equipment
(WEEE). Do not dispose of
this device as normal domes-
tic waste, but rather in an
environmentally friendly man-
ner via an officially approved
waste disposal company.
EN
13
Publicité
