Publicité
RECEIVER FUNCTION
Frequency selection
Press SET to enter the menu. Press ▲ or ▼ to change the frequency.
Squelch adjustment
Double press SET, the squelch icon (SQ) will flash on the display. Press ▲ or ▼ to change the squelch value.
Auto scan
Triple press SET, the scan icon (SCAN) will flash on the display. Press ▲ or ▼ to turn auto scan on/off.
Lock function
Press and hold SET (of left channel) to lock/unlock the receiver.
Change volume
Press ▲ or ▼ to change the volume.
IR match
Press and hold ▼ on the receiver. The IR icon will be flashing on the display. Move the IR receiver of the transmitter
(handheld/bodypack) in range of the IR transmitter on the receiver module and keep it there for 3 seconds.
TRANSMITTER
HANDHELD
Rotate the bottom part of the microphone and unscrew. When fully
unscrewed, slide the bottom part down to uncover the controls and
battery compartment. Insert the correct batteries (2x AA).
1. LCD display
2. Power / mute
Press and hold to turn the microphone on/off.
When on, press to (un)mute the microphone.
3. IR receiver
When IR flashes on the display: move the IR receiver of the
transmitter (handheld/bodypack) in range of the IR transmitter on
the receiver module and keep it there for 3 seconds to match
frequency.
4. Up / down
▲ and ▼ function buttons.
5. Set
Press to enter menu and confirm input.
BODYPACK
1. LCD display
2. Power
Press and hold to turn the bodypack on/off.
When on, press to enter menu mode.
3. Up / down
▲ and ▼ function buttons.
When on, press and hold ▼ to (un)mute the bodypack.
4. Input
3.5mm input connector for lavalier-/headset microphones.
5. Antenna
6. Battery compartment
Insert two AA-type batteries to power the transmitter. Slide the
cover to the "open" position and insert the batteries correctly. The
display shows the power level of the batteries. If the transmitter is
not used for a long period (approx. 1-2 weeks), remove the batteries
to protect the device for possible leakage.
7. IR receiver
When the IR flashes on the display: move the IR receiver of the
transmitter (handheld/bodypack) in range of the IR transmitter on the receiver module and keep it there for 3 seconds to
match frequency.
5
Publicité
