Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
RADIANT
design D. D'URBINO P.LOMAZZI coll. CASATI
OPEN AND CLOSE THE TABLE
•
To activate the table press the main power switch on I / ON.
•
To open: the operator after making sure that there are no people or things around the table (See 3.safety warnings) must
hold the rocker button on OPEN until the table is completely opened.
•
To close: the operator, after making sure that there are no people or things around the table (See 3.safety warnings) must
hold the rocker button on CLOSE until the table is completely closed.
•
For security reasons, if the operator ceases to hold the button the mechanism stops immediately.
•
It is important that between one command and another(e.g. between opening and closing) you wait approxamately 2 sec.
For security reasons if you press multiple buttons simultaneously or within 1-2 sec. the engine will not start.
WARNING!
!
ALWAYS HOLD THE KEY TO OFF WHEN NOT IN USE OR BY ENDED CLOSURE OR OPENING
OPERATION.
REMOTE CONTROL
•
To open: the operator, after making sure that there are no people or things around the table (See safety warnings) must press
the button A to open for 1-2sec.
•
To stop the opening movement press the button B
•
To close: the operator, after making sure that there are no people or things around the table (See safety warnings) must
press the button B to close for 1-2sec.
•
To stop the opening movement press the button A
•
If the green led of the remote control does not switch on pls replace the batteries by unscrewing the screws on the back.
WARNING!
!
KEEP THE REMOTE CONTROL AWAY FROM CHILDREN .
CLOSE
ON
OPEN
OPEN
A B
OK
GB/ 24
CLOSE
ON
OPEN
CLOSE
Publicité
Table des Matières
