Télécharger Imprimer la page

Rowenta LISSEA RF7360 Mode D'emploi page 18

Publicité

NOT RF7360-5360-3330 017276
4. USING THE BIKINI ACCESSORY (MOD.RF5360)
Your bikini accessory (6mm) will enable you to shave and trim the hair of the bikini area.
Operating instructions:
- Fit the bikini accessory (G) onto the shaving head (A).
- Move your appliance slowly over the bikini area, against the hair.
- For better efficiency of the appliance, remove the hair regularly using the brush or by
completely removing the accessory and blowing on it, in order to avoid jamming.
- At the end of the session, remove the bikini accessory with the plastic fitting at its base.
5. USING THE BIKINI HEAD (MOD. RF7360)
AND COMBS
The bikini head (k) comes with two combs (3mm and 6mm) (L) which lift up the long
hairs of the bikini area so they can be cut by the blade.
Operating instructions:
- Remove the shaving head by pressing the release buttons on the head (E) and pull the
head gently upwards (fig 1).
- Fit in the bikini head, using the two hooks located at the back of the head, then swivel it
until it clicks. (fig 10&11),
- Fit the desired comb (3 or 6 mm) onto the bikini head (fig 7):
• If you want a hair length of about 3mm, use the 3mm comb.
• If you want a hair length of about 6mm, use the 6mm comb.
- At the end of the session, remove the comb using the plastic fitting at its base and slide
it along the bikini head.
- After use, remove the bikini head by pressing the release buttons on the head (E) and
gently pulling the head upwards (fig 12).
- To put the shaving head back on the appliance: insert the head using the two hooks
located at the back of the head, then swivel it until it clicks (fig 2&3).
6. USING THE BIKINI HEAD
without a comb for a neat bikini outline
If you want a close shave, use the bikini line trimmer head without a comb:
- Stop and unplug the appliance.
- Remove the comb (fig 8).
- Switch on the appliance.
- Hold the appliance at right angles to your skin and move it slowly against the hair.
- After use, remove the bikini head by pressing the release buttons on the head (E) and
gently pulling the head upwards (fig 12).
- Stop and unplug the appliance.
6/02/07
9:26
13
Page 13

Publicité

loading

Ce manuel est également adapté pour:

Lissea rf5360Lissea rf3330Lissea rf3330e0Lissea rf7360e0