Publicité
CARE INSTRUCTIONS CONTINUED:
Roller Brush Maintainance
We recommend periodically checking Roller Brush for
hair or debris.
1.
Squeeze Roller Brush Release Tabs in and gently pull
Roller Brush cover door open.
2.
Lift Roller Brush out of the Roller Brush compartment.
3.
If there is any debris or hair wrapped around Roller
Brush, carefully use included Roller Brush Cleaning
Tool* or scissors to remove it from Roller Brush.
*How to use Roller Brush Cleaning Tool - Glide Ripping
Blade along shaft of Roller Brush and use Comb End to
remove debris.
Caution: Roller Brush Cleaning Tool has sharp tip and
Ripping Blade. Avoid contact with Tip and Ripping Blade.
4.
Handwash Roller Brush as needed with only water. Let
air dry completely for at least 24 hours before
re-installing.
5.
Place Roller Brush back into Sweeper Head by lining
up the notch on right side of Roller Brush with connec-
tion point inside Roller Brush Compartment. Press
until it clicks securely in place and close Roller Brush
cover door.
We recommend periodically replacing Roller Brush for
best results.
<04>
Publicité
