Platter Auto-stop
If the Auto-stop Switch is set to ON position, the platter will stop spinning automatically when the
record plays to the end. In some rare occasion, if the turntable stops playing before the end of the
record, set the switch to OFF position the turntable should overcome this issue.
Pitch Control
The turntable speed can be increased or decreased by approximately 10% by rotating the Pitch Control
knob. To increase the speed, turn the Pitch Control knob clockwise. To decrease the speed, turn the
knob counter-clockwise.
Needle Replacement
Removing Needle
1. Gently hold both sides of the needle.
2. Gently pull the needle forward and remove.
Installing Needle
1. Position the needle with its tip facing down.
2. Line up the back of the needle with the cartridge.
3. Push the needle back into place.
Bluetooth Operation
1.
Turn the Function Switch to Bluetooth mode , you will hear an activation sound from the unit.
2.
Turn on the Bluetooth feature of your audio device, search for "CROSLEY CR6035B" and pair.
3.
Once your device is successfully paired with the unit, you will hear a short confirmation sound
from the unit.
4.
Play and stream music from your device to the unit.
Note: Bluetooth version - 5.0
English