Publicité
Connect the appliance that should be charged
with the product by plugging its USB-plug into
the output USB port
port
1 ]
[
Disconnect the charged appliance from the
product after charging, by unplugging the USB-
plug from the USB-socket.
˜ Mounting the product on a
wall
Fig.1
m
CAUTION! Risk of electric shock! Do not
damage any electrical cables during the wall
mounting.
INFO: Use the screws
mount the product on the wall.
1. Measure up the wall or mounting surface for
drilling the holes. Use a spirit level to improve
the accuracy.
2. Mark a drill holes.
3. Drill the holes:
–
Ø: approx. 2.5 mm
–
depth: approx. 30 mm
4. Insert the screws
5. Tighten the screws
protrude approx. 5 mm from the wall. (Fig.2)
6. Attach the product: Place the mounting holes
onto the screws
6 ]
[
(Type C).
8 ]
[
8 ]
[
8 ]
[
(Type A) or output USB
2 ]
[
(not include) to
8 ]
[
into the wall hole.
. The screw heads should
. (Fig. 3)
GB/IE
35
Publicité
