Publicité
Board Diagram
24 Port Gigabit Unmanaged Ethernet Switch
Front
0E-24PGIGUN
24 Port Gigabit Unmanaged Ethernet Switch
Toggle switch to change
different working modes
for Port 1 - 22
Back
Installation Steps
Please check the following items before installation. If any items are missing,
please contact ADI or the installing company.
24 Port Gigabit Unmanaged Ethernet Switch
AC power cable
Screws
Bracket for 19" Rack
User manual
Please follow the below installation steps:
1. Please turn off the power signal and the display device's power before installation. Please note:
Installing with the power on will damage the equipment.
2. Use network cable to connect the PC or other wired equipment that needs to be on the provided
equipment.
3. Use a network cable to connect equipment uplink to the port and router LAN.
4. Connect the power adapter.
5. Check if the installation is correct, the equipment is in good condition and the connection is stable;
then connect power to the system.
6. Ensure the Ethernet equipment has power and is working properly.
Default
AC/IN 100-240V
Power Input Port
INPUT: 100 - 240VAC
24 Port Gigabit Unmanaged Ethernet Switch
Port 1 - 22
Downlink Ports
Port 23 - 24
Uplink Ports
1 pc
1 pc
4 pcs
2 pcs
1 pc
Publicité
