Dexter 750JS3-100.5 Manuel D'instructions page 142

FR
10. Warranty
ES
a) DEXTER products are designed based on the most rigorous quality standards
PT
for products intended for the general public.
b) The jig saw (Model n°750JS3-100.5) is covered with a warranty of 3 years
IT
starting from the date of purchase. This warranty covers all manufacturing or
material defects.
PL
(problems and solutions) in the brochure; if the problem persists, please check
UA
with the nearest store.
RO
e) Repairs and change of parts do not extend the duration of the initial
GR
warranty.
f) Breakdowns resulting from normal wear and tear or from improper use of
EN
the product are not covered by the warranty. This includes, among others, the
switches, the safety circuit breaker and the motors, in case of wear.
h) In case of doubt, please check with your point of sale.
i)
ing is required:
carburetor.
accidents
clogging of the ventilator block.
incorrect repairs have been attempted.
For claims relating to the the warranty to be taken into account, the follow-
Providing proof of purchase
That no repairs and/or change of parts have been performed by a third party.
That the issue is not a matter of normal wear and tear.
That required maintenance and repair works have been performed correctly.
That no deterioration has taken place as a result of incorrect setting of the
That there has been no forcing, improper handling, unauthorised use, or
That no deterioration has taken place due to overheating, resulting from
That no work has been done on the product by an unskilled person, and no
That the tool/battery/charger have never been disassembled or opened.
That the tool/battery/charger have never been in a wet environmentn (dew,
142