Publicité
Tools Needed (Not Included)
Electric Drill
Pencil
WARNING:
• Avoid the risk of personal injury or property damage! Tighten the
lag screws
A1
only until they are pulled firmly against the wall plate
(DO NOT overtighten). Do not use a drill; only use a socket wrench.
• Use wall anchors
• Mount the wall plate directly on the concrete surface.
• Minimum concrete block size: 8" x 8" x 16" (203 x 203 x 406mm)
Tape Measure
A2
for this mounting option.
3/8" (10mm)
Hammer
Concrete Drill Bit
20
7/16" (11mm)
Level
Socket Wrench
A2
Wall Anchor
Publicité
