Publicité
INSTALLATION OF BASIN UNIT
1.
FIX THE WALL PLATES «0271» (screws and wall plugs not included)
1
Determine the finished height
CAUTION:
Ensure that you use the correct fixing
according to the type of wall construction.
2.
REMOVE THE DRAWERS, SEE SEPARATE INSTRUCTIONS ATTACHED
2
Position the wall plate, mark
and drill
The dimensions are given to the bottom of the wall plate.
If you want to use a CLS27 plinth reduce fixing height by 40mm.
3
Fix the first wall plate
All dimensions are in mm.
Incoming supply area
ATTENTION :
Utiliser des fixations adaptées à la
qualité de votre mur.
CAUTION :
Use wedges to put the
unit on the floor
4
Place the second wall
plate aligning it with the
first one
2
Publicité
