Velbus VMBDMI-R Manuel page 8

a
SPECIFICATIONS
• required mains voltage: 220-240 V AC / 50 Hz
• maximum load: 400 W
• dimming from 0 to 100% in 4 seconds
• built-in non-resettable fuse 4 A
• power supply: 12...18 V DC
FEATURES
• leading edge phase control
• suitable for:
o mains:
◊ incandescent light bulbs and halogen lights
◊ certain types of dimmable LED lights
(test before installing)
o low voltage: halogen lights and certain types
of dimmable LED lights in conjunction with
dimmable wire-wound iron core transformer
or electronic transformer suitable for
dimming with leading edge control. Not all
electronic transformers are suitable for
dimming with the VMBDMI-R. Please test
before installing.
• consumption: max. 30 mA
• dimensions: 90 x 36 x 58 mm / 3.5 x 1.4 x 2.3"
• width : 2 DIN modules
• soft on or off to prolong the lamp's life
• thermal protection
• in case of necessity: protection at too inductive load
(can be disabled for dimmable LED lamps)
• operation modes:
o dimming
o slow on/off
o timer
o multistep dimmer
o moods
o ...
• timer: 1 s ... 3 days
• dimspeed: 2 s ... 23 hours
• configuration: through Velbus configuration module
together with the Windows program Velbuslink
(version 9.25 or higher)
8
www.velbus.eu