Publicité
5. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
APPLIANCE PAIRING (ON APP)
l
Download the Hoover Wizard App on
your device.
The Hoover Wizard App is available
for devices running both Android and
iOS,
both
for
smartphones.
Get
all
the
details
functions by browsing the App in
DEMO mode.
The frequency of the home Wi-Fi
network has to be set on the 2.4 GHz
band. You can not configure the
machine if your home network is set
to the 5 GHz band.
l
Open the App, create the user profile
(or log-in if it is already created previously)
and pairing the appliance following the
instructions on the device display or the
"Quick Guide" attached on the machine,
or at the link:
go.he.services/hd500mt
TO ENABLE REMOTE CONTROL
l
Check that the router is switched on and
connected to the Internet.
l
Load the laundry and close the door.
l
Turn the programme selector to the
REMOTE CONTROL (Wi-Fi) position
the controls on the control panel will be
disabled.
tablets
and
for
of
the
Wi-Fi
l
Start the cycle using the Hoover Wizard
app.
When
completed, turn off the machine by
turning the programme selector to the
OFF position.
TO DISABLE REMOTE CONTROL
l
To exit REMOTE CONTROL mode while
a cycle is underway, turn the programme
selector to any position other than
REMOTE CONTROL (Wi-Fi), without
going through the OFF. The control
panel on the appliance will be operative
once again.
l
With the door closed, turn the programme
selector to the REMOTE CONTROL (Wi-
Fi) position to control the appliance using
the app once again. If there is a cycle
underway, it will continue.
With the door opened, the REMOTE
CONTROL
will
enable it again, close the door, turn
the
programme
position
other
CONTROL and then select it again.
:
64
the
cycle
has
be
disabled.
selector
to
than
REMOTE
been
To
any
Publicité
