Publicité
3. 2 Make sure the front wheel will not rub the brake pads
when it is rotating under the condition of not pinching
brake handle.
Step 4 Install the front fender
and headlight
4.1 Install the front fender and headlight on the front fork
with matching screws and nuts
Make sure the front fender and headlight support cannot
be moved.
by a 4#
hexagon wrench.
4.2 Adjust the headlight to a proper angle by this way:
loosen the adjusting bolt with with the
the headlight tilt angle to the best position, and then
tighten the bolt.
4.3 Connect the cable plug to the headlight, please note to
9
8#
wrench, adjust
Publicité
