Publicité
REMOTE CONTROL HANDLE
1. The power supply for the remote
control handle needs 2 AAA batteries
(not included).
2. Press the power switch to start the
product. Press it again to turn it off.
3. The speed ranges from 0 to 9 levels.
4. The temperature ranges from 30-70.
4.
Long-pressing the temperature swit-
ch allows for quick temperature ad-
justment. When the temperature is
set to 30℃, pressing the «Lower the
Temperature» button again will deac-
tivate the heating function.
ASSEMBLY
2. HOSE
1.
Insert the hose into the air outlet
of the device and tighten it anticlo-
ckwise.
Negative Ions,
Battery Level
Temperature
1. SILICONE RINGS
1.
Place the silicone ring inside the inner grooves of the air outlet on the device and the connec-
tor for the nozzle and the hose. (If there are already silicone rings in these two places, there
is no need to place them again.)
Icons from
left to right:
Speed,
Heating,
Increase
the Speed
Raise the
3. NOZZLE
1.
Electronic
Display Screen
Reduce
the Speed
Lower the
Temperature
Power Switch
Battery Cover
Insert the nozzle into the hose and
tighten it clockwise.
7 7
Publicité
