Publicité
Connection
Push the adapter for external extraction
♦
firmly onto the chip ejector
Push the hose of a suitable workshop
♦
vacuum cleaner onto the chip ejector
or the adapter for external extraction
as applicable.
Removal
Pull the hose of the workshop vacuum
♦
cleaner off the chip ejector
adapter.
Pull off the adapter for external extrac-
♦
tion
, if attached.
Parking shoe (see fig. B)
The parking shoe
appliance down without risking damage to
the workpiece. While working, the parking
shoe
is flipped up and rear part of the
plane sole
is exposed.
Planing
CAUTION! RISK OF KICKBACK!
Always switch the appliance on before
►
applying it to the workpiece.
Set desired cut depth.
♦
Switch the appliance on.
♦
Place the appliance with the front part of
♦
the plane sole
Move the appliance with straight, even
♦
motions over the workpiece.
Push forward slowly and do not exert
♦
excessive pressure on the plane sole
Excessive speed reduces the surface
quality and can lead to clogging of the
chip ejector.
.
or the
allows you to put the
on the workpiece.
Chamfering edges
The V grooves
allow easy chamfering of workpiece edges.
Use the V groove that corresponds to
♦
the chamfer width required.
,
Place the planer with the V groove
♦
onto the workpiece edge and guide it
forwards.
Fitting the rip fence (not supplied,
see fig. G)
NOTE
Replacement parts that are not listed
►
(such as batteries, rip fence or fold
depth stop) can be ordered via our
Service Hotline.
Undo the fastening screw
♦
appliance.
Fit the rip fence
♦
using the fastening screw
Removing/fitting the planing
blade
(see figs. C–D)
RISK OF INJURY!
Always switch the appliance off and
►
remove the battery before carrying out
any work on the appliance.
CAUTION!
There is a risk of injury due to the cut-
►
ting edges of the planing blade
Never touch the cutting edges of the
►
planing blade
.
The planing blade
and can be turned.
Replace the planing blade
♦
cutting edges are blunt.
Do not try to sharpen the planing blade
♦
.
in the front plane sole
on the
onto the appliance
.
.
has two cutting edges
when both
GB / IE
!
|
9
Publicité
