Publicité
•
Wash stainless steel parts with water, and then dry
them with a soft cloth.
Cleaning the electric hotplate
1. Use the cleaning powder or the cleaning pad.
2. Clean the hob with a moist cloth and some
detergent.
Troubleshooting
Warning! Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate the
hob.
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Make sure, you
operated the hob correctly. If not the servicing by a
service technician or dealer will not be free of charge,
A
MOD.
PROD.NO.
SER.NO
DATA
A) Stick it on Guarantee Card and send this part (if
applicable).
14
Possible cause
The fuse is released.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
3. Heat the hotplate to a low temperature and let it
dry.
4. To keep the hotplates in good shape, rub in a
sewing machine oil regularly. Polish off the oil with
absorbent paper.
also during the warranty period. The instructions about
the Service Centre and conditions of guarantee are in
the guarantee booklet.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
SER.NO.
0049
B) Stick it on Guarantee Card and keep this part (if
applicable).
C) Stick it on instruction booklet.
Remedy
Make sure that the fuse is the cause
of the malfunction. If the fuse relea-
ses again and again, contact a
qualified electrician.
TYPE
IP20
Publicité
