Publicité
3. Comissioning
On/Off
Press the power button three times (quickly) to turn the device on/off.
Choose between N (Normal-Mode) or T (Timed-Mode) by pressing the minus or plus-button. To confirm your selection, press the power button. The
vaporizer will then begin heating. Normal mode (N) allows you to manually set the temperature, which is constant. Timed mode (T) requires a start and
end temperature, in addition to the session duration time. The device has a built in safety duration of five minutes. If the device has been inactive for this
period of time, it will automatically turn off. To reactivate the device, simply press and hold the power button for three seconds.
Normal Mode (N): Manually set the heating temperature with the plus and minus buttons. Once you have set the temperature the vaporizer will begin
heating. You can subsequently adjust the temperature during this process.
Endless Timer: By double-clicking the power button during the 5-minute session, the session can be extended as often as required by a further 2 minutes.
The device switches off automatically after the timer has expired. To heat the device up again, restart it.
Once the timer has expired, the device will automatically turn off. To reheat the device, simply turn it back on.
On Timed Mode (T) set the start temperature with the plus (+) and minus (-) buttons and press the power button to confirm. You will then be prompted to
set the end temperature using the plus and minus buttons. Confirm by pressing the power button.
Set the session duration (in minutes) with the plus and minus buttons and confirm by pressing the power button. After confirming the duration, the
device will begin heating to the set start temperature. The vaporizer will continue to heat during the session until it reaches the end temperature.
Endless Timer: 30 seconds before the timer expires the device will vibrate twice. To extend the session by two minutes (at the end temperature), press the
power button twice at any stage during the session.
When the timer expires the device will automatically turn off. To reheat the device you will need to turn it on again.
Alternate between Celsius (°C) and Fahrenheit (°F): Press and hold both the power and minus (-) buttons simultaneously until the temperature unit
changes.
Vibration On/Off: Press and hold both the plus and minus buttons for 3 seconds.
4.
Cleaning
The mouthpiece can be wiped cleaned with alcohol. Allow the mouthpiece to dry completely before reattaching it to the base and battery. Unscrew the
filter screen from the mouthpiece to clean or replace. The heating chamber can be cleaned with the supplied brush.
Do not use any liquids to clean the heating chamber.
Publicité
