Publicité
I.N.O.X. CHRONO
MOVEMENT: RONDA 5040.E
C
B
D
Fig. 1
I
H
J
Fig. 2
E
1
2
A N T I M A G N E T I C
22
F
1
2
A N T I M A G N E T I C
22
G
SETTING THE TIME AND DATE (FIG. 1)
EN
WATCH INDICATIONS:
A: Hour hand
B: Minute hand
Setting the time, day and date
1. Use your thumb and forefinger to
unscrew the crown and set your watch
to position
1
2. Pull the crown to position 3.
The second hand will stop
3
3. Turn the crown until the day before
the desired day appears. Remember:
the day and date advances at 12:00
midnight, not 12:00 noon
4. Push the crown to position
BASIC CHRONOGRAPH FUNCTIONS (FIG. 2 )
PUSHERS:
F: Chronograph start/stop
G: Split timing, zero reset
A
Basic functions
1. Start: Press push-button
2. Stop: To stop the timer, press push-button
chronograph hands: MINUTE (H) / SECOND (I) / 1/10 SECONDS (J)
3. Zero positioning (reset): Press push-button G. The three chronograph hand (H, I, J)
will be reset to their zero positions
ADJUSTING THE CHRONOGRAPH HANDS TO ZERO POSITION
1. Pull out the crown to position
2. Keep push-buttons
(the second counter hand rotates by 360° corrective mode is activated)
3. Press push-button
4. Press push-button
5. Follow the same procedure for the 3 sub-dials
3
6. Push the crown back into position
Important: To avoid any damage to the movement, do not perform the
DATE SETTING between 09:00 p.m. and 3:00 a.m. when the date mechanism
is in action.
C: Second hand
D: Date
5. Turn the crown to the date before the
desired date
6. Pull the crown to position
7. Turn the crown until the desired day
and date appears
8. Continue to turn the crown to the
desired time
9. Push the crown to position
make sure to screw down the crown
with slight pressure as you turn it
2
CHRONOGRAPH MARKERS:
H: Minute counter
I: Second hand
J: 1/10 second counter
F
F
once more. Read the three
3
F
and
G
depressed simultaneously for at least 2 seconds
F
to move the hand to the correct position; 12 o'clock precisely
G
to select the next hand
1
to exit reset mode
E: Weekday
3
1
and
Publicité
