Publicité
gate configurations (choose which best fits your scenario):
Measure the width of the opening where you intend to install the gate.
Refer to the following illustrations to determine the correct installation
configuration. Baseboard molding may change which configuration is
appropriate.
(28"- 32") without extension frames
(38"- 42") with both extension frames
Note: This instruction book illustrates installation of gate configuration C.
If choosing gate configuration A, skip ahead to step 2. Otherwise, follow
step 1 using the appropriate extension frames that best fit your scenario.
A
C
NEVER install two extension
frames on the same side of the gate.
B
(33"- 37") with one extension frame
Important: Gate includes a
door stop (part E) which prevents
the gate from swinging open in
one direction. When installing the
gate at the top of stairs, be sure
that the door stop is on the
stairway side of the gate so the
door cannot open over the stairs.
While the door stop comes
assembled on the gate, it can be
removed and installed on either
side of gate frame.
When gate is not used at top of
stairs, door stop may be removed
to allow gate door to open in
either direction.
WARNING
3
Publicité
