Accessories; Standard Accessories; Optional Accessories - Metabo GP 3V Instructions De Sécurité Et Mode D'emploi

English
WARNING
ALWAYS use Only authorized metabo HPT replacement parts and accessories. Never use replacement parts
or accessories which are not intended for use with this tool. Contact metabo HPT if you are not sure whether
it is safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

(1) Wrench (43/64''(17 mm)) (Code No. 936638) ..........1
(2) Wrench (15/32''(12 mm)) (Code No. 936553) ..........1
(3) Side Handle (Code No. 329758)..............................1

OPTIONAL ACCESSORIES

○ Collet chuck (for 1/8''(3.175 mm) shaft)
Dimensions and handling methods other than the shaft
hole are the same as those for the 1/4''(6 mm) collet
chuck.
○ Case
NOTE
Specifications are subject to change without any
obligation on the part of the metabo HPT.
14

ACCESSORIES

...sold separately