Helios AIR1-AAD NH EL+WW RH 5000 Notice De Montage Et D'entretien page 8

Installation and Operating Instructions
EN
Weather protection cover AIR1-AAD NH EL+WW / KR KW+DX
2. Apply sealing tape to the marked side of the weather protection cover (note profile!), see Fig. 4.
✓
3. Align the edge of the weather protection cover with the side of the external cooling or heating register as follows (the
applied sealing tape must be aligned in the direction of the ventilation unit), see Fig. 5.
4. Connect weather protection cover and external register with enclosed holders and screws, see Fig. 6.
5. Screw the self-tapping screws in all holes, see Fig. 7.
Fig.4
Fig.5
Fig.6
3