Publicité
Assembly instructions
1 - Remove the plastic caps and pearl cotton on
the end of each part. If they were broken or
missing during transportation, pleas don't worry,
they are just for protecting the pole.
Insert Insert the lower part (Part B) and tree top
(Part A) as indicated in below figure.
2- Unfold one by one the branches beginning by the lower branches.
Each branch tip must be shaped to it's proper position to give the tree
a natural look. This is done by gently grasping the left and right wing
tips and spreading them out away from the centre tip. During the
shaping, the snow powder and leaves may drop down.
3 - Make final adjustment and trimming to the tree.
04
The tree is now ready to be decorated.
Ensure that the decorations are uniformly
distributed on the tree.
When lights need to be turned on, connect
the adapter to power source.
Disassembly and storage
Remove all decorations.
Disassemble the tree in reverse order of the assembly.
For a better conservation, store the tree in its carton box in a cool
dry place.
Do not store when humid.
Caution
To be assembled by or under the supervision of an adult.
Keep plastic bags out of reach of young children.
Keep away from fire or hot temperatures.
Do not light a candle on or near the tree.
Do not leave lighted lighting chains unattended.
Do not overload the tree with heavy and/or too numerous
decorations.
Place the tree on a plane surface in order to ensure its stability.
Keep an eye on young children.
Keep those information for future reference.
05
Publicité
