Publicité
NOTE:
Please follow below operation if the steam outlet (steam nozzle
or froth nozzle)is blocked:
Firstly,turn the steam control knob to OFF position and cool
down the appliance for about 30 minutes,then poke the
steam outlet (steam nozzle or froth nozzle)for several
times with a needle about 1mm in diameter,finally press
the steam button and turn on the steam control knob to
check if the appliance can produce steam normally when
the steam button indicator lights up solidly.
Please contact service department if the appliance can't
produce steam after above operation.
CLEAN AND MAINTENANCE
Make sure the appliance has
completely cooled down.
7△
Close the steam knob
and cut off power source.
Remove the steam wand
to clean with water.
Wipe the steam wand.Periodically clean the steam nozzle
hole with a needle to avoid blockage of the steam nozzle hole.
Clean the metal funnel with
water.Should the holes in the
steel mesh become blocked
with coffee grinds,use a fine
bristled brush to help clean.
Simply wipe the body and
removable
cup
shelf
with
a
clean
damp cloth or sponge.
8
Remove the removable cup
shelf and drip tray from the
appliance and remove any
spilt coffee and water.
Publicité
