Publicité
About the operation of your freezer.
Starting the Freezer
Clean the inside of the freezer with a mild solution of baking soda and water (see Care and Cleaning ).
1
Connect cord to power outlet.
2
On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the OFF position.
3
Make sure the temperature control is set at 4.
4
Allow freezer to operate for at least four hours before placing food inside.
5
On models with a Temperature Monitor or High-Temp Alarm Switch, set the switch to the ON position.
6
Temperature Control
Freezing temperature selection is made by
setting the control from 1 to 7 (coldest).
If you want colder or warmer temperatures,
adjust the control one step at a time.
Temperature Monitor Alarm
Some models feature a temperature
monitor that provides an audible alarm.
The temperature monitor alarm is located
above the temperature control. The alarm
sounds if the temperature in the freezer
rises 10°F (5°C) or more above normal for
selected setting. Alarm may sound if the
temperature control dial is turned to a
much lower/colder setting or if a large
amount of unfrozen food is added at one
time. Alarm is controlled by a three
position switch.
Allow several hours after each one-step
adjustment for the freezer temperature
to stabilize.
Turning the control to O stops the cooling
process but does not shut off power to the
freezer.
(on some models)
• O or OFF prevents alarm from sounding
when freezer is warm, such as during
initial start-up or defrosting.
or TEST sounds alarm regardless of
•
temperature. Alarm system should be
tested at least once a month.
• 1 or ON is proper setting for normal
freezer use. Return switch to 1 after
defrosting.
GEAppliances.ca
5
Publicité
