Radio & Aux Input - KLIM BOOMBOX B3 Manuel D'utilisation

RADIO & AUX INPUT
USING THE RADIO
Step 1: Press the MODE button and select RAD,
then extend the FM antenna to improve radio
reception.
Step 2: Long press PREV or NEXT buttons to
jump to the previous or next available station.
Short press to manually select the frequency.
SETTING RADIO STATION PRESETS (AUTOMATIC MODE)
Press and hold the PLAY/PAUSE button to auto-scan available FM frequencies. All
detected frequencies will be saved to presets P01 to P20. Once the auto-scan has
finished, briefly press the PLAY/PAUSE button to cycle through all saved presets.
SETTING RADIO STATION PRESETS (MANUAL MODE)
Step 1: select the desired frequency using these buttons, as explained earlier.
Step 2: briefly press the REP button to enter memory mode. When the on-screen text
flashes, wait for 2 seconds, then press the button again to save the current frequency
to a preset (e.g. P01 to 105.3). Note: you can press the PLAY/PAUSE button while the
numbers are flashing to select which preset you want to save the station to.
Step 3: briefly press the PLAY/PAUSE button to select a preset FM station, and repeat
to move to the next station (P01 to P20).
AUXILIARY PORT (IN)
Step 1: connect a 3.5 mm cable
(not included) to the AUX
port on the KLIM Boombox.
Step 2: Connect the other end
to the output auxiliary port on
your device (such as an Mp3
player)
6
RAD
Step 3: Press the MODE button
to select AUX mode. Audio
played through the connected
device will now sound through
the boombox.