First Use - KLIM BOOMBOX B3 Manuel D'utilisation

FIRST USE

1. POWER UP
The KLIM Boombox can be powered up via AC power or batteries.
AC POWER
Plug the AC cord into a standard AC
outlet (100-240V - 50/60 Hz)
Main Switch (On/Off):
Move the switch to the right side to put
the device in standby mode. Keep the
device switched off when not in use to
extend battery life.
AC power indicator: the red LED indicator lights
up when the device is connected to an AC
power source.
2. TURN ON THE BOOMBOX
While on Standby mode, press the Power
button to turn on the boombox.
Hold the power button for 3
seconds to turn the RGB lights
on and off.
The KLIM Boombox has a battery recharging system that recharges the batteries when
plugged in using the AC cord. If you plan to use the Boombox mainly while connected
to an AC source for an extended period, we recommend removing the rechargeable
batteries to preserve them.
RECHARGEABLE BATTERIES
1. Open the battery compartment cover.
2. Take out the included batteries.
3. Remove the protective film from the batteries.
4. Insert the four batteries as shown above.
5. Close the battery compartment cover.
4