Publicité
Step 18
Step
å
To make adjustments to the drawer, loosen SCREW #2 in the SLIDES a 1/4 turn, then turn the cam clockwise or
counter-clockwise. Notice how the drawer raises or lowers as you turn the cam. By adjusting the drawer this way, it will
help the DRAWER FRONT line up better when closed. Tighten the SCREWS when finished with adjustments.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
Loosen screw #2 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #2.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Scan to rate and review
your piece at Sauder.com
Your opinion matters!
Page 22
Cam
433805
13
www.sauder.com/service
Publicité
