Publicité
Step 15
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D133 and D139).
å
Fasten a DRAWER RIGHT (40DC) to the RIGHT DRAWER SIDE (D133) and a DRAWER LEFT (40DD) to the LEFT DRAWER
SIDE (D139). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The glides are not intended to rotate.
å
Fasten two KNOBS (208K) to a DRAWER FRONT (E). Use two BLACK 7/8" MACHINE SCREWS (37S).
å
Repeat this step for the other drawers.
2
www.sauder.com/service
Glide end
1
D139
E
208K
(8 used)
GOLD 5/16" FLAT HEAD SCREW
(16 used for the SLIDES)
37S
BLACK 7/8" MACHINE SCREW
(8 used in this step)
10A
3S
433805
Screw head - turn CAM
to line up holes in the
SLIDES with holes in
DRAWER SIDES
10A
(8 used)
Glide end
D133
1
2
Drawer Slide
Center the screw in the oval hole.
6
Page 19
Publicité
