Hilti TE 800-AVR Mode D'emploi page 10

Intended use
The product described is an electrically-powered breaker with pneumatic hammering mechanism. It
is designed for heavy chiseling work on masonry and concrete.
▶
Operation is permissible only when connected to a power source providing a voltage and frequency
in compliance with the information given on the type identification plate.
Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system, which greatly reduces
vibration.
Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights.
Power level indicator
The breaker is equipped with a power level indicator LED.
Status
The power level indicator lights.
Items supplied
Breaker, side handle, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or
at: www.hilti.group | USA: www.hilti.com
Technical data
Breaker
For details of the rated voltage, current, frequency and/or input power, please refer to the power
tool's country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the power tool. The operating
voltage of the transformer or generator must always be within +5% and -15% of the rated voltage of
the power tool.
Product generation
Rated power input
Single impact energy
Weight
5
Meaning
End of service interval – servicing is due. Bring
the product to Hilti Service in good time. This
will help to ensure that it's always ready for use.
Meaning
Chiseling power is reduced to 70%. Press the
power level selector switch again to return to
full chiseling power. The chiseling power level
can be adjusted only when the tool is plugged
in to the electric supply.
TE 800­AVR
01
1,850 W
21 J
10.6 kg
(23.4 lb)
2064796
*2064796*