Publicité
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1
2
Press BAND to select a band.
Press numbered
buttons O-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and O.
To select preset number 15, press +10 and 5.
Selecting
a preset number
on the main unit
Press TUNER BAND to select a band. Then, press
PRESET
repeatedly or turn MULTI JOG.
Each time b PRESET is pressed, the next ascending number
is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
CLEAR, and press II SET within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
To change the AM
tuning interval
The default setting of the AM tuning interval is 10 kHz/step.
If you use this unit in an area where the frequency allocation
system
is 9 kHz/step,
change
the
tuning
interval.
Press POWER while pressing TUNER BAND.
To reset the interval, repeat this procedure.
m
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
ENGLISH
1()
Publicité
