Publicité
OPERATING PROCEDURES
1. Unfold the pot supports.
2. Completely close the gas feed by turning the flame control knob to the right
(clockwise) to OFF position.
3. Remove the protective plastic cap from the gas cartridge and carefully screw on the
stove for 3 turns — care should be taken for a little gas will be lost to the atmosphere
at this point. Do not overtighten for this may damage the stove's dual leak-proof
gasket that prevents leakage.
4. Turn the flame control knob to the left (counter clockwise) twice. Place a naked flame
around 1-3cm from the burner and the gas should ignite immediately.
5. A normal flame should be stable and burn upward with a blue or saffron yellow colour
depending on flame control.
DISASSEMBLY PROCEDURE
1. Turn the flame control knob fully to the right (clockwise) to the OFF position and check
the flame is completely extinguished.
Publicité
