Publicité
You can install this unit either horizontally, at 22.5° ,45° ,67,5° or vertically. See the figure below for mounting
angle.
□ V-H Screw Setting
Loosen two V-H screws, one on the right side and the other on the left of the CD changer unit, and slide them
to position V, H, 22.5°, 45°, or 67.5°. (The V-H screws are originally set to position H before shipment from the
factory.)
_
_
• Horizontal mounting
: Slide the V-H screws to position H.
• Mounting at 22.5°
: Slide the V-H screws to position 22.5°.
• Mounting at 45°
: Slide the V-H screws to position 45°.
• Mounting at 67.5°
: Slide the V-H screws to position 67.5°.
• Vertical mounting
: Slide the V-H screws to position V.
y
67.5' 45 22.5"|_| Q
For Right
side
E
N
G
L
I
S
H
10
Mounting at 45°
CORRECT
WRONG
Mounting at 67.5°
Do not -—
/ Set to
10° MAX
slope in
i-H
this direc-
tion
r. \ i
1
*
MV
*
Top side-
of unit.
>
o
1
\
1
Vertical mounting
CORRECT
WRONG
CX-DP610EUC
Publicité
