Publicité
INSTALLATION INSTRUCTIONS
Before putting your appliance into service
▶ Remove all inner and outer packaging components.
▶ Check that none of the following parts are missing:
▶ Before connecting your appliance to a power supply, allow it to
stand upright for about 2 hours. This reduces the risk of malfunc-
tion of the refrigeration system due to handling during transport.
▶ Clean the inner surfaces of the unit with a soft cloth and warm
water.
▶ Place your unit on a floor strong enough to support the weight of
the fully filled unit.
▶ Make sure the unit is level by adjusting the front feet underneath
the unit. Make sure that the appliance rests on its feet in a stable
manner.
▶ Install the appliance away from direct sunlight and heat sources
(radiator, hot plate, etc.). Direct sunlight can damage the unit's
coating and heat can increase its power consumption. If the am-
bient temperature is extremely cold or hot, this may prevent the
unit from operating properly.
▶ The unit is not designed to be installed in a basement or appliance.
▶ Caution: Make sure that the unit is kept away from any substance
that may cause combustion.
▶ Check that the water tank is in place before connecting the unit.
22
NO.
1
Main appliance
2
Operation manual
Contents
OCEARTT90W3
1 unit
1 copy
Publicité
