Publicité
CP 0017 SVR
CP 0017 SVR H 0.580 in. (14.7 mm) and Rd.
0.680 in. (17.3 mm).
1. Slide the insertion tool into the retainer hole.
2. Rotate and lock the insertion tool into the
retainer.
3. Screw the locked retainer and the insertion tool
over the cylinder threads with hand force, until
it is tight on the retainer ring.
CP 0017 SVR hexagon
1. Place the buffer (A) over the stem of the insertion
tool.
2. Place the retainer over the hexagon body of the
insertion tool.
3. Insert the insertion tool into the cylinder and
screw the retainer onto the cylinder until it is
locked.
CP 0017 SVR hexagon
with optional quick release retainer, see the
spare parts list.
1. Unscrew the retainer approximately 2.5 turns.
2. Insert the insertion tool into the retainer.
3. Screw the retainer onto the cylinder thread with
hand force, ensuring that the insertion tool shank
enters the cylinder.
9800 0621 90c | Original instructions
www.CrowderSupply.com • Toll Free: 888-883-5144
3
x 2 in. (19 x 50 mm).
4
3
x 2 in. (19 x 50 mm)
4
Safety and operating instructions
4. The assembled inserted tool is centered in the
cylinder.
Operation
WARNING
Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
Learn how the machine is switched off in the event
►
of an emergency.
Stop the machine immediately in all cases of
►
power supply interruption.
Start and stop
Start the machine by squeezing the trigger while
firmly holding the handle.
Stop the machine by releasing the trigger. The
trigger returns automatically to the stop position.
Operating
Starting a cut
Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
15
Publicité
