Publicité
Press and hold the three keys together to access the key functions. (A0, Bb0 and B0)
21. Sound select
Press and holt one of the main sound buttons to select a specific sound of the group
22. Demo song
Press to start/stop playing the demo song
23. Sound demo
Start/stop playing the sound demo of the current R1 sound
24. Sound 2 volume -/+
Adjust the volume level of sound 2 (R2/layer or L/Split)
25. Sound 2 octave -/+
Adjust the octave of Sound 2 (R2/layer or L/Split)
In function, press E2 and F2 at the same time to reset to the default octave setting
26. Twinova -/+
Turn the twinova on/off. Press to adjust the octave of both the left and right sections. In the twinova mode simultaneously
press A2 and B2 to reset to the default octave setting
27. Touch
Press to set touch on/off. The default state is on
• 1: Soft 1
• 2: Soft 2
• 3: Medium
• 4: Hard 1
• 5: Hard 2
28. Transpose
Press to shift the pitch of the entire keyboard up or down by a maximum of one octave in semitone steps. Press A3 and B3
simultaneously to reset to the default transpose setting
29. Song
Press to start playing song nr 1-10
30. Metro
Turn the Metronome on/off. Press C#5 – F#5 to select the metronome beat. For example, when selecting 0, no accent will
play. When selecting 2, you will get an accent of 2 beats
31. Tap
Press this key at an even speed to set the tempo
32. Tempo Value
If you wish to input a value under 100, please press 0 first ant the a 2-digit number. When entering a number lower than 5 or
above 320, the piano will set the tempo to 5 or 320
33. Tempo 0-9
Press to increase or decrease the tempo value by the step of 1
In tempo function, press A5 and B5 at the simultaneously to reset to default tempo
34. Reverb -/+
Turn the reverb on/off. Press to adjust reverb level up or down. When in reverb function, press D7 and E7 simultaneously to
reset to the default reverb setting
35. Local control
Press to set local control function on or off.
On: this instrument will work alone as a master keyboard
Off: this instrument will be controlled by connected device. It will not produce sound when you play, but will output MIDI
message
Note: Local control function by default is on
36. Guide
Press to turn the guide on/off that produces a beep sound when Function commands are used
37. Headphone jack
When connecting headphones to the PHONES/OUTPUT port, the loudspeaker will be disenabled
automatically. You can perform without disturbing others.
CONNECTIONS
1. USB PORT
Connect the keyboard to another MIDI compatible device. Transfer
information with computer in both direction such as you can store the
music that you played on his keyboard to the computer.
2. SUSTAIN PEDAL JACK
The function of sustain can produce natural sustain by stepping
upon sustain pedal when you perform. Please insert the plug of
sustain pedal into SUS PEDAL jack. You can open/close the sustain function through the sustain pedal plug.
3. LINE OUT
This piano has built-in speaker system. It can be connected with other external amplifier or speaker system. First turn off the
power of piano and the external equipment, then insert one end of stereo audio cable into LINE IN or AUX IN jack of other
hi-fi equipment and insert the other end into LINE OUT jack in the rear panel of the piano.
Publicité
