Publicité
When
hooking
up
speaker systems, attach the positive
(+) side of the speaker to the terminal
marked 4-16Ω. Connect the negative
(-) side to the terminal labeled COM.
Connecting
High-Voltage
Speaker Systems: For parallel connection
of low-impedance (70V) systems, attach
the positive (+) side of the speaker to the
terminal
marked
70V.
negative (-) side to the terminal marked
COM.
Model
Description
Rated Power Output
Speaker Outputs
Frequency Response
Input
Input Impedance
THD
S/N Ratio
Crosstalk
Power Consumption
Power Supply
Dimension
Weight
Technical Overview
standard
8Ω
Distributed
Attach
the
Class-D Two-Channel Power Amplifier
2 x 120W
8Ω & 70V
L/H Cut OFF 20Hz-20kHz (+1/-2dB)
L/H Cut ON 70Hz-10kHz (+1/-3dB)
0.775V, 0dBu, balanced phoenix connector by two channels
10KΩ
<0.1% at 1KHz/-3dBv, 70W
>80dB
>60dB at 1KHz, Max output
300W
110VAC input, 50-60Hz with DC24V input
48.2 x 42 x 4.4 cm (18.97 x 16.53 x 1.73 in)
6.5kgs (14.3lbs)
MC2120
5
Publicité
