Publicité
ENGLISH
Switching on the steam function
Press on the steam function ON/OFF button, the « READY » light indicator will flash for 30 seconds to indicate the pre-
heating stage.
When the « READY » light indicator stops flashing, press at the same timer the steam trigger and the steam trigger
unlock button.
You can use the steam function and the vacuum function at the same time, you only need to press on the Vacuum
function ON/OFF button.
At the end of your cleaning, press one time on the ON/OFF button to switch off the appliance.
WARNING: THE FULL APPLIANCE HAS TO BE USED TO CLEAN THE
FLOOR ONLY, CANNOT BE USED TO CLEAN WINDOW OR WALL
SURFACE.
ALWAYS HOLD THE APPLIANCE WHEN IT IS NOT IN THE WALL
MOUNTING STORING SPACE. ALWAYS HOLD THE APPLIANCE
DURING USE OR WHEN SWITCH OFF.
DO NOT LET THE APPLIANCE ON UPRIGHT POSITION
UNATTENDED AND NOT BEING HELD.
DO NOT LET THE APPLIANCE ON UPRIGHT POSITION IF IT IS NOT
STORED ON THE WALL MOUNTING FIXTURE.
6
Publicité
