Publicité
General safety instructions
• To assemble the drying rack safely, the user must
have read and understood these instructions for
use before assembling the product.
• Before positioning the ground spike or ground
tube, look for a good spot for the rotary, if possible
in a sunny position and not under a tree or over a
garden path. Ensure that there is enough space to
unfold and rotate the rotary.
• If the rotary is not in use, always close the ground
spike or ground tube. The cap prevents dirt and
dirt cap does not obstruct grass cutting.
Assembly
CAUTION! Risk of injury! Take care not to
jam fingers during assembly and disman-
tling.
► P. 2, item 1
– Press the button and push up.
► P. 3, item 2
– Push the button upwards, if there are too loose
lines, they can be adjusted using the method
below.
1. If the line is loose, first click loose the plastic lock.
2. Pull the line tightly and push back the plastic lock.
3. Place the line in the corner.
Clean & Care
– Clean the base pole occasionally with a damp
cloth and a little household cleaner. You can also
use small quantities of conventional fully-syn-
thetic care sprays on a cloth to rub the base pole
clean. When the dryer is open, you can spray a
small quantity of care spray on the line retraction
holes on the support arms. Regularly remove
earth, sand and water from the base socket.
Warning:
– A rotary dryer is not a child's toy. Be aware, chil-
dren can get caught in the lines!
– Do not exceed the maximum load capacity of 24
kg.
Disposal
Disposal of product
This appliance must not be disposed of with regular
household waste! Dispose of the appliance in the
appropriate manner. For more information, consult
your community waste disposal service.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
40m outdoo r drying rack
GB
7
Publicité
