Publicité
Let's Glide!
1.
Ensure 2 x AAA batteries are fitted to the Handle, and that the main
Battery Pack is charged using the original Power Adaptor, and fitted.
2. Select your Pads : for general cleaning, we recommend using either the
pink or blue Pads. For the application of a wax or oil-based solution on a
wooden floor, or for a brilliant finish on high gloss floors, please use the
blue Pads.
Pads are self-attaching using Velcro, and may simply be applied onto the
two rotating discs, with the coloured side (pink or blue) facing the floor.
Pads may be machine- or hand-washed as often as required. Additional or
replacement Pads are available from AirCraftVacuums.com.
POWERGLIDE ' s
3. Use the Top-up Cup to fill
tank (capacity is 300ml) with
water, via the Water Inlet. You may also use a diluted floor cleaning
solution. We recommend pre-mixing 5ml of cleaning solution per full tank of
water, to avoid any blockages of the nozzle, and to avoid the emergence of
streaks.
You may also choose to spray floors directly with water, cleaning solution or liquid
wax before going over with your POWERGLIDE, using a spray bottle. Do not
dispense wax or polishing solution into the tank itself.
4. Press the Foot Switch on the base of your POWERGLIDE. The white
LED headlights on the base will illuminate.
POWERGLIDE
If left idle for 10 minutes,
will automatically enter Sleep mode. To
re-awaken, press the Foot Switch twice.
4. Press the Start/Stop button on the handle to begin cleaning. The green
LED on the handle will flash when a button is pressed.
5. Press the Spray button on the Handle to apply liquid to your floor
surface, sufficient to keep the Pads damp.
POWERGLIDE
6. Guide
by turning your wrist to easily steer to the left and
right, cleaning and buffing as you go. Spray and then hover over any stains,
to let the rotating Pads do the hard work. Simply guide over the same area
to dry and buff. Play Clean!
6
Publicité
