Publicité
Manual - WW 150 RGBW
1.
Tilt the product over and screw the adjustable brackets into the provided screw holes.
2.
Set the desired angle and then tighten the brackets with an Allen key.
Mounting on a truss
1.
Bolt clamps (1) to the omega holders (2) with M12 bolt and lock nut through the
hole in the omega holder.
2.
Fasten the omega holders to the brackets by inserting both screws M5 (3) into the
holes of the brackets and tighten fully clockwise.
3.
Clamp the fixture on a truss and tighten both rigging clamps.Use only the safety
wire with a snap hook with screw lock gate.
USAGE
Publicité
