Publicité
Manual - WW 150 RGBW
The fixture is equipped with 3-pin XLR connectors for DMX Input/Output. Use only a shielded
twisted-pair cable designed for 3-pin XLR connectors to connect the controller to the fixture
or one fixture to another.
Making a DMX512 chain:
1.
Connect the DMX output of the controller directly to the DMX input of the first fixture
in the DMX chain.
2.
Sluit de DMX-uitgang van het eerste armatuur in de DMX-keten aan op de DMX-ingang
van het volgende armatuur.
3.
Connect the DMX output of the first fixture in the DMX chain to the DMX input of the
next fixture.
4.
A fixture with 32 DMX512 addresses (8 pieces * 4 colours = 32), 16 fixtures add up to 512
addresses, so a maximum of 16 fixtures in a DMX universe.
INSTALLATION
•
Make sure the structure you are mounting this product on can support the weight.
•
Mount the product securely. You do this with a screw, a nut and a bolt. You can also use a
mounting clamp when attaching this product to a truss. The U-shaped support bracket
has three mounting holes that can be used to attach the clamps to the projector.
•
Always consider easy access to the device before choosing a location for this product
Always use a safety cable when mounting this product overhead.
•
Watch the online video at http://www.bekafun.com/nl/a/71371821/270w-rgbwa-led-
wall-washer-light-18-15w-ip65 for more information about attaching the brackets.
Publicité
