Amica WCB2K60B36 Serie Notice D'utilisation page 20

CONTROLS
Appliance controls- single and dual zone
The control panel is shown in figure 4. For reference it is also shown
below:
Single zone
Dual zone
– Power button
– Light button
– "+" button
– "-" button
To switch the power on/off
Press and hold the power button for one second to switch the wine cooler
on.
Press and hold the power button for five seconds to switch the wine
cooler off.
Note: Turn off your appliance by unplugging the power cord from the
wall outlet.
To change the temperature
• Press the "+" or "-" buttons until the required temperature is shown
on the display.
• The Preset temperature is 12˚C / 54˚ F. (for single zone models)
• For dual zone models: For the upper/left zone, the default temper-
ature setting is 8°C/46°F, and for the lower/right zone, the default
temperature setting is 12°C/54°F.
• To view the set temperature, touch the "+" or "-" button at any time
and the set temperature will flash in the LED display for five seconds.
• The display shows the current internal temperature when the wine
cooler is on.
Note: The temperature in the lower zone must be set either the same as
or higher than the temperature in the upper zone.
- 20 -