Publicité
BACKPANEL
1. AUX IN
Connect an external audio device using a 3.5mm audio cable.
2. TF CARD
Insert a TF card to play.
3. USB DISK
Insert a USB flash drive to play.
4. LED LIGHT
Displays the status of charging and microphone connection.
- The red LED lights up when charging and goes out when fully charged.
- The blue LED lights up when connected and flashes when disconnected.
5. TYPE C PORT
Connect to a power supply to charge the main unit.
Pogo Pins and mating pads
POGO PINS AND MATING PADS
Please place the main unit and microphones into the base. They will be
Place the main unit and microphones into the base, they will be charged when needed.
charged when needed.
Note: please make sure that the microphones slide down the slot into the base.
Microphone Panel
NOTE:
Ensure that the microphones slide down the slot into the base connecting
the pogo pins to the mating pads.
5
Publicité
