Publicité
BEFORE FIRST USE
1. Remove all packaging elements.
2. Clean the grill plate and pans before using the appliance for the first
time (See Cleaning and Maintenance).
3. Wipe the outside of the appliance with a damp cloth.
4. Check that the switch is in the "Off" position before plugging in the
device.
Remarks:
- Ensure that the device is placed on a stable and secure surface in
order to eliminate any risk of tripping or to avoid contact of the
device with water.
- Make sure to connect the device to a domestic electrical outlet with
ground outlet.
- Never try to touch the hot surface of the grill, pans or heat source
before they cool down.
USING THE APPLIANCE
1. Remove all protective materials.
2. Wipe the plates with a damp cloth or sponge to remove dust. Wipe the
dust with a soft cloth or paper towel.
3. Select a suitable location to install the device, ensuring enough free
space with the wall to allow heat to dissipate without damaging closets
or walls.
4. Make sure the thermostat is set to the "OFF" position. Insert it into the
plancha so that the two pins in the socket are fully inserted.
5. Turn the thermostat knob clockwise. The red light comes on. When the
temperature of the plates reaches the desired temperature, the light
goes out. If the temperature wheel is on the "OFF" position, the plate
will no longer heat up. Before the first use, it is recommended to apply
a little oil or grease on the plate.
6. Important: The baking plate will become very hot. Be careful not to
touch the baking plate with your hands by accident.
7. After use, unplug the appliance from the electrical outlet and let it cool
to room temperature before cleaning.
8. Warning: Do not immerse the device in a liquid. It is forbidden to
Publicité
